Military Embedded Systems

MilSource

Articles 1 - 15
Comms

Using network address translation (NAT) to ease network management on mobile military networks - Blog

November 03, 2020

ETHERNET EVERYWHERE BLOG. At MilSource, our technical team often get questions on how to more easily manage the “networks” now living and communicating on every mobile military vehicle. Implementation teams and integrators are faced with the daunting task of managing hundreds of networks that are the same set of devices just repeated in every mobile vehicle.

Comms

Ethernet and SMBus combine to deliver data and power management on a single platform - Blog

October 08, 2020

ETHERNET EVERYWHERE BLOG. Because customers need to simplify and economize on space, many networking companies are being asked to move beyond traditional networks and look at ways to combine networking and power management. You’ve got devices that need to share data, but they also need to be powered.  If you are looking at a mobile military platform, Power over Ethernet (PoE) simplifies cabling and reduces the number of devices needed on a platform.

Comms

Timing is everything when mobilizing an Ethernet network - Blog

September 10, 2020

ETHERNET EVERYWHERE BLOG. Today we are going to discuss timing and synchronization of devices on an Ethernet network. Synchronization of packet cadence is necessary for time-sensitive applications work like they’re supposed to.

Comms

How Ethernet is key to VICTORY - Blog

June 28, 2019
ETHERNET EVERYWHERE BLOG: Adding or enhancing new command, control, communications, computers, intelligence, surveillance and reconnaissance (C4ISR) and electronic warfare (EW) technologies in armed forces? tactical ground vehicles has historically been done through a ?bolt-on? approach. Communications systems have traditionally been independent, siloed systems that lacked integration, futureproofing and as importantly, economies of size, weight, power, and cost (SWaP-C).
Comms

Fiber and copper working together for today's Ethernet backbones - Blog

January 31, 2019
ETHERNET EVERYWHERE BLOG: In all mobile military and airborne platforms, the transition from mechanical systems to electronically controlled systems is taking place. As the electronics content continues to grow, so do the processing loads that happen on every platform. Embedded computers are rising in sophistication as they need to support sensors, radar, video streams, and remote-control functions. Distributed processing, the interconnection of devices, and communication between devices has led to an exponential jump in bandwidth requirements on the interconnects between these devices. Traditional protocols like IEEE 1394 and USB still have legacy applications on these platforms, but most new platforms and platform retrofits are turning to Ethernet as their de facto communications protocol, supporting 1 Gbps in most platforms and growing to 10 Gbps in certain payloads.
Comms

The future of Ethernet - Blog

September 28, 2017
ETHERNET EVERYWHERE BLOG: In my last blog, I took a look at the history of Ethernet. It was fun to look back at history, however it is more important to look at the future. With Ethernet becoming the ubiquitous connectivity standard for service providers, enterprises, and military applications, we are letting go of proprietary networking technologies and heading directly in to industry standard networking based on Ethernet.
Cyber

Aloha! Ethernet: The history of Ethernet - Blog

July 31, 2017
ETHERNET EVERYWHERE BLOG: So, to get a little retro on everybody, I thought I?d take a step back in time and have a fun look at the history of Ethernet. A couple of months ago, Ethernet actually celebrated its 44th anniversary. That?s right. Ethernet was developed back in 1973 and today, 44 years later, it is becoming THE ubiquitous local area networking (LAN) technology in addition to wide area networking (WAN) and now even infiltrating storage area networking (SAN).
Radar/EW

Commercial vs ruggedized Ethernet switches and routers. What's the difference? - Blog

June 28, 2017
ETHERNET EVERYWHERE BLOG: We?re often approached by companies who have designed a prototype system composed of networks sensors, cameras, GPS systems, and other elements with compute platforms over Ethernet. These prototypes often use commercial-grade Ethernet switches. Sometimes they use the enclosure, sometimes they pull the components out of the enclosure and try to jerry-rig the switch components in some sort of fashion. What they soon find out, however, is that these commercial-grade switches (and other commercial-grade componentry) do not stand up the rigorous environmental factors that mobile military and aerospace applications almost always run in to.
Comms

Static routing vs dynamic routing on Ethernet networks - Blog

November 25, 2015
ETHERNET EVERYWHERE BLOG: “Routing” on a network is a common term that I think almost everybody knows and understands today. Just to clarify, routing is the act of finding a path for a data packet to travel from one network to another. However did you know that there are three key elements needed to make this routing happen:
Unmanned

Ethernet: The connectivity platform of choice for UAVs - Story

April 29, 2015
Ethernet has become the connectivity platform of choice for military unmanned aerial vehicle (UAV) system designers.
Comms

Powering devices using Ethernet - Blog

April 03, 2015
ETHERNET EVERYWHERE BLOG: Power over Ethernet, or POE, is a technology that enables a single cable to provide both data connection and electrical power to networked pieces of equipment such as sensors, IP video cameras, and even wireless mesh nodes. POE works across standard network cabling (i.e. CAT5) to supply power directly from the data ports to which networked devices are connected.
Comms

Link aggregation: A cool tip for better bandwidth & redundancy on Ethernet switches - Blog

February 04, 2015
ETHERNET EVERYWHERE BLOG: Have you ever worried that your existing 1G link may not be cutting the mustard for some data transmission? What about link redundancy and failover with your existing Ethernet device? Wouldn’t it be nice to know that you you’ll always have failover?
Comms

The 31 flavors of Ethernet - Blog

January 06, 2015
ETHERNET EVERYWHERE BLOG: Our last blog covered the basic subject of why Ethernet is a good choice for military and embedded applications. Now that Why has been explained, I thought that I would spend some time talking about the What? Most people are often surprised by the different flavors, so to speak, of Ethernet that exist. I’m not sure that there are actually 31 flavors, but for this discussion, it is close enough.
Comms

ETHERNET EVERYWHERE BLOG: Why Ethernet? - Blog

November 12, 2014
ETHERNET EVERYWHERE BLOG: This is a first in a series of blogs covering the latest and greatest information surrounding Ethernet. However, I thought I’d start out the first blog answering the question “Why Ethernet?" and then, I’ll proceed through a series discussing the latest innovations, standards, and applications.
Radar/EW

Unmanaged vs. managed Ethernet switches for modern warfare applications - Blog

October 16, 2014
In today's modern warfare – where survivability and mission success is dependent on data acquisition, analysis, and instruction – a growing number of Ethernet-based devices supporting missions must be connected to the central mission computer, and often to each other. Ethernet switches are needed throughout military infrastructure as a common means of making such connections. Customers often ask us whether they need a managed or unmanaged switch. Let's go through the basic capabilities of each.
Articles 1 - 15