TEWS Technologies Introduces Conduction Cooled XMC with Dual Channel 10 Gigabit Ethernet Interface
Eletter Product
TEWS TECHNOLOGIES increases its I/O offering beyond PMC and IndustryPack modules with the TXMC387, a Conduction Cooled Switched Mezzanine Card (CCXMC) module. The dual channel 10 Gigabit Ethernet Interface is ruggedized for harsh environmental conditions including COTS (commercial-off-the-shelf), industrial, communication, networking and transportation applications.
Both Ethernet interfaces support 100, 1000 Mbit/s and 10 Gbit/s transmission rates at full duplex operation. The XMC-Connector P15 provides access to the Intel X540 dual port 10GbE controller via an x8 PCIe link. The controller is equipped with a 16 Mbit serial flash memory which is accessed by hardware at power-up, which has a firmware area and which can be accessed by software.
The two Ethernet interfaces of the TXMC387 are capable of performing an auto-negotiation algorithm which allows the link-partners to determine the best link parameters. The Ethernet controller on the TXMC387 is user configurable via configuration and register accesses over the PCIe interface.
The TXMC387 routes both Ethernet ports which are galvanically isolated from the Ethernet controllers to the XMC back I/O P16 connector. On the TXMC387-10R the Ethernet ports are mapped in the X12d range specified in VITA46.9 standard. The TXMC387-20R maps both Ethernet ports in the X8d range specified in VITA46.9 standard. LEDs indicate the different network activities.
The module meets the requirements to operate in extended temperature range from -40°C to +85°C (Card Edge Temperature).
About TEWS TECHNOLOGIES
TEWS TECHNOLOGIES is a leading solutions provider of embedded I/O and CPU products based on open architecture standards such as PMC, XMC, IndustryPack® (IP), CompactPCI, standard PCI, PCIe, AMC, FMC, and VME. TEWS has more than 30 years of experience designing and building turn-key embedded interface solutions using the philosophy to listen and respond to our customers’ needs. Using this 'customer first' approach, TEWS has developed a large number of standard and custom products for industrial control, telecommunication infrastructure, medical equipment, traffic control and COTS applications. TEWS' line of embedded I/O solutions is available worldwide through a global network of distributors. For more information, go to www.tews.com.
