PRODUCT OF THE WEEK: ADLINK's SOSA-aligned, 3U VPX processor blade for C4ISR, electronic warfareSponsored Story
March 07, 2022
This week’s product, ADLNK Technology’s VPX3-TL module, integrates an 8-core CPU for enhanced graphics computing, artificial intelligence (AI) acceleration capabilities, and diverse I/O for next-generation, mission-critical applications. The module is based on Intel Xeon W-11000E processor, formerly Tiger Lake-H, with enhanced data and graphics performance and targets Command, Control, Communications, Computers, Intelligence, Surveillance and Reconnaissance (C4ISR), radar, electronic warfare (EW), and other defense applications.
Being aligned to the Sensor Open Systems Architecture (SOSA) Technical Standard, enables the design to provide non-proprietary, open-architecture embedded computing capabilities that are easily reconfigurable and upgradable, highly cost-effective, and quick to develop and deploy.
Interoperability between different systems - including C4ISR, EW, signals intelligence (SIGINT), cognitive radio, and radar - is critical. The SOSA standard is one of several standards that fall broadly within the U.S. Defense Department’s Modular Open Systems Architecture (MOSA) initiative. SOSA centers on key interfaces and open standards, based on the VPX standard (VITA 46/48/65), and aims to develop a common, modular hardware architecture across next-generation, mission-critical applications.
Previously, Command, Control, Communications, Computers, Intelligence, Surveillance and Reconnaissance (C4ISR) and electronic warfare systems were functionally similar but developmentally stove-piped. Aligning with SOSA enables ADLINK to facilitate its development of non-proprietary, standards-based, open architecture solutions for a broader aerospace and defense market.
Reduced SWaP with Intel Technology
The ADLINK VPX3-TL Series is optimized for reduced size, weight, and power (SWaP) and includes as much as 64GB DDR4-2666 soldered ECC SDRAM; 2x 10GBASE-KR or 2x 1GBASE-KX; one XMC expansion slot with PCIe x8 Gen3 to P2 rear I/O; USB 3.0 and SATA III, (formerly known as SATA 6Gb/s), for high I/O throughput. The Intel RM590E chipset with Unified Extensible Firmware Interface (UEFI) secure boot and dual 256Mbit SPI flash supports Microsoft Windows 10, Linux and VxWorks 7.
- 1x 2.5GBASE-T to P2
- Supports PXE
- Supports Wake-On-LAN (WOL)
- 1x DisplayPort to P2
- Supports DP++
- Resolution up to 8K at 60Hz
- Display mode selection via BIOS
- COM2: RS-232/422/485 to P2 (RS-232 is 2-wire)
- Max data rate for RS-232/422/485 is 115200bps
- RS-485 supports auto flow control
- RS-232/422/485 mode configuration via BIOS
- Discrete TPM 2.0 chip
- Supports Intel Secure Boot (UEFI)
- Dual BIOS support
- Windows 10
- VxWorks 7
- Linux (kernel 5.4 and higher)
- 1x GPIO to P1, 3x GPIO to P2
- Supports +3.3V (default) or +5V GPIO by BOM option
- GPI with edge trigger or level trigger interrupt
- 1x SATA 6Gb/s to P2 1x
- M.2 2242 on top side (M-key)
- Supported M.2 devices: S1, S2, S3, D1, D2, D3, D4
- M.2 capacity up to 1TB
Following Modular Open Systems Approach (MOSA) principles, ADLINK actively works with partners to develop open standards-based, custom, commercial off-the-shelf (COTS) products, enabling system integrators serving the aerospace and defense sectors to deliver fast-to-market solutions